F. Roger, and A. Traidia
ENSTA Paristech, Paris, France
AREVA NP, Saint Marcel, France
The prediction of mechanical response of assemblies during arc welding necessitates the knowledge of thermal history of the components and the constitutive behavior of the materials. COMSOL can simulate thermal and structural interaction but it needs to evaluate the time evolution of internal variables like viscoplastic strain and hardening parameters. In the present paper we extend the ...
G. Atmeh, F. Darwish, and Z. Hasan
Jordan University of Science and Technology, Irbid, Jordan
Texas A&M University, College Station, TX, USA
The present study focuses on the design and analysis of a single-engine, propeller-driven general aviation airplane. Initial weight estimation based on the initial sketch and the design mission profile is conducted. The estimated weight and other design parameters are used to define the external geometry of the fuselage, wing and tail. Conic lofting is utilized to render a layout of the design ...
J.S. Crompton, L.T. Gritter, S.Y. Yushanov, and K.C. Koppenhoefer
AltaSim Technologies LLC, Columbus, OH, USA
Analysis of burning candles is extremely complex; combustion produces a highly non-linear temperature profile through the flame in which local temperatures may exceed 1400 °C. Heat transfer includes radiation, conduction and convection components and the low melting point of the candle wax leads to a phase change that allows mass transport via capillary flow prior to combustion in the flame. ...
Conestoga College, Kitchener, ON, Canada
The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam as a source of heat over physical domain made of different materials. Through interaction modeling of ...
Implementation of the Perfectly Matched Layer to Determine the Quality Factor of Axisymmetric Resonators in COMSOL
M.I. Cheema, and A.G. Kirk
McGill University, Montreal, QC, Canada
Due to the inseparability of the wave equation, numerical methods are needed to develop an accurate electromagnetic model for various axisymmetric resonators such as micro-discs and micro-toroids. Our purpose is the implementation of a perfectly matched layer to determine the quality factor of axisymmetric resonators with high accuracy in COMSOL. We treated the perfectly matched layer as an ...
C. Van der Woude, and S. Narasimhan
University of Waterloo, Waterloo, ON, Canada
This paper presents a study of a wind turbine subjected to wind and seismic loading, carried out using COMSOL Multiphysics. The dynamic properties and response of wind turbine structures are of interest, as recent developments in wind energy have led to the design and construction of increasingly large and flexible turbine structures. A typical turbine structure model was created in ...
U.S. Naval Academy, Annapolis, MD, USA
COMSOL is finite element modeling software capable of solving partial differential equations. This capability allows for the modeling of boundary value problems, which is necessary to the study of light and the properties of light propagation. For this study, we are modeling Fraunhofer diffraction of light using a solution of the Helmholtz equation with boundary values appropriate for ...
J.S. Crompton, L.T. Gritter, S. Yushanov, K.C. Koppenhoefer, and D. Magyari
AltaSim Technologies, LLC, Columbus, OH, USA
Golden Acoustics, Detroit, MI, USA
The preferred acoustic response of recording studios, auditoriums and conference halls is to have an even energy response over the entire room and throughout full audio spectrum. This can be accomplished by using acoustic panels with complex surface structures that scatter acoustic waves and diffuse sound level variability over the room volume or through the use of sound absorbing materials to ...
D. Groulx, and W. Ogoh
Dalhousie University, Halifax, NS, Canada
A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > Tm, prompting the PCM to start melting, from pure conduction, in a linear fashion starting at x = 0. The ...
A. Traidia, and F. Roger
AREVA NP, Technical Center, Saint Marcel, France
ENSTA Paristech, Paris, France
Using COMSOL Multiphysics, a finite element model is introduced in this paper to describe the couplings between the welding arc and the weld pool dynamic in pulsed gas tungsten arc welding. The cathode, arc-plasma and melting anode regions are taken into account. The unified time-dependent model describes the heat transfer, fluid flow and electromagnetic fields in the three regions. The ...