研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.


COMSOL コンファレンス 2020 論文集を見る

2012 - Bostonx

Optimization of Artificial Diffusion Stabilization Techniques and Corresponding Mesh Density Distribution in Drift Dominated Transport of Diluted Species

J. Jadidian[1], M. Zahn[1], N. Lavesson[2], O. Widlund[2], K. Borg[2]
[1]Massachusetts Institute of Technology, Cambridge, MA, USA
[2]ABB Corporate Research, Västerås, Sweden

This paper presents an optimized combination of artificial diffusion techniques to stabilize a drift dominated streamer discharge model which includes COMSOL Multiphysics’ Transport of Diluted Species modules for positive ion, negative ion, and electron charge densities, coupled through ... 詳細を見る

Using CFD to Predict the Performance of Innovative Wind Power Generators

D. Allaei[1]
[1]Sheer Wind Inc., Chaska, MN, USA

INVELOX is an innovative wind power generation system as shown in Figure 1. It is comprised of a wind capturing system that accelerates and delivers high kinetic energy wind to a power conversion system placed in the Venturi section of the INVELOX. The objective of this project is to ... 詳細を見る

Pressure Drop CFD Modeling in Spacer-Filled Channels for TFF Ultrafiltration

Y. Zou[1]
[1]EMD Millipore Corporation, Bedford, MA USA

Membrane-based tangential flow filtration (TFF) cassettes are used for the clarification, concentration and purification of fluid streams containing macromolecules of proteins. In TFF, the protein fluid is pumped tangentially along the surface of the membrane. The feed flow along the ... 詳細を見る

Modeling Low Frequency Axial Fluid Acoustic Modes in Continuous Loop Piping Systems

E. Gutierrez-Miravete[1], E.R. Marderness[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]General Dynamics-Electric Boat, Groton, CT, USA

Industrial fluid systems often involve continuous piping loops. These systems consist of varying lengths of pipes and hoses connecting multiple components together. Fluid resonances can detrimentally affect the operation of fluid systems and components. This work used COMSOL to ... 詳細を見る

Modeling a Combined Photovoltaic-Thermal Panel

E. Gutierrez-Miravete[1], B. Fontenault[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]General Dynamics-Electric Boat, Groton, CT, USA

A novel combined photovoltaic-thermal panel can simultaneously increase the conversion efficiency of the PV cell and utilize some of the excess thermal energy created by the conversion process (see Figure 1). The Conjugate Heat Transfer physics in COMSOL was used to create a two ... 詳細を見る

Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems

S.M. Musa[1], M.N.O. Sadiku[1], J.D. Oliver[1]
[1]Prairie View A&M University, Prairie View, TX, USA

In this paper an attempt has been made to design and analyze integrated circuit interconnects for unshielded four conductors with three levels system using Finite Element Method (FEM). The computational and simulation work has been carried out with help of COMSOL Multiphysics software. ... 詳細を見る

Electromagnetic Parameters Extraction for Integrated-Circuit Interconnects for Open Three Conductors with Two Levels Systems

S.M. Musa[1], M.N.O. Sadiku[1], J.D. Oliver[1]
[1]Prairie View A&M University, Prairie View, TX, USA

The accurate estimate of values of electromagnetic parameters are essential to determine the final circuit speeds and functionality for designing of high-performance integrated circuits and integrated circuits packaging. In this paper, a new quasi-TEM capacitance and inductance analysis ... 詳細を見る

EM Simulation of a Low-Pass Filter Based on a Microstrip Defected Ground Structure

J.E. Rayas-Sánchez[1], J. Aguilar-Torrentera[1], Z. Brito-Brito[1], J.C. Cervantes-González[2], C.A. López[2]
[1]Universidad Jesuita de Guadalajara, Tlaquepaque, Jalisco, Mexico
[2]Intel Guadalajara Design Center, Tlaquepaque, Jalisco, Mexico

We perform EM simulations of a low-pass microstrip filter consisting of a cross-junction open stub and two unit sections implemented as defected ground structures (DGS). The defect introduced by unit sections corresponds to an etched lattice on the copper backside ground plane. The ... 詳細を見る

Analysis of Superheater Tubes with Mutual Irradiation as Applied to a Solar Receiver Steam Generator

N. Lemcoff[1], S. Wyatt[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]Alstom Power, Windsor, CT, USA

The objective of this paper is to analyze the temperature variations within a superheater tube of a solar receiver steam generator. The tube is heated by concentrated, collimated solar irradiation with major cooling by an internal steam flow. The influence of heat loss by radiation, ... 詳細を見る

COMSOL Simulations for Steady State Thermal Hydraulics Analyses of ORNL’s High Flux Isotope Reactor

P.K. Jain[1], V.B. Khane[2], J.D. Freels[1]
[1]Oak Ridge National Laboratory, Oak Ridge, TN, USA
[2]Missouri University of Science and Technology, Rolla, MO, USA

Simulation models for steady state thermal hydraulics analyses of ORNL’s HFIR have been developed using COMSOL. A single fuel plate and coolant channel of each type of HFIR fuel element was modeled in three dimensions. The standard k-? turbulence model was used in simulating turbulent ... 詳細を見る