研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.


COMSOL コンファレンス 2020 論文集を見る

Numerical Simulation of Phonon Dispersion Relations for Phononic Crystals

G. Zhu[1], E.M. Dede[1]
[1]Toyota Research Institute of North America, Ann Arbor, MI, USA

In previous work, a two-dimensional (2D) model was carried out to simulate the phononic band structure of a phononic crystal with square lattice structure, but this model did not account for the out-of-plane phonon dispersions [1]. In fact, for 2D films used for coating materials, it is ... 詳細を見る

Thermal Model for Single Discharge EDM Process Using COMSOL Multiphysics

K. Gajjar[1], U. Maradia[2], K. Wegener[2]
[1]Indian Institute of Technology Bombay, Mumbai, Maharshtra, India
[2]Institute for Process Tools and Manufacturing (IWF), Zurich, Switzerland

Electrical Discharge Machining (EDM) is a non-conventional process used for machining electrically conducting materials. In die sink-EDM, sparks are generated between tool and workpiece resulting in heating of both electrode surfaces and creating a melt pool of metal which leads to ... 詳細を見る

Turbulent Compressible Flow in a Slender Tube

K.O. Lund[1], C.M. Lord[2]
[1]Kurt Lund Consulting, Del Mar, CA, USA
[2]Lord Engineering Corp., Encinitas, CA, USA

Pressure-drop experiments were conducted for the turbulent, compressible flow of air in a small, slender tube, and modeled with COMSOL heat transfer module, and analytically. A scalar integration variable is introduced which integrates the mass velocity [kg/m²s] over the inlet area ... 詳細を見る

Modeling and Prediction of Line Pattern Collapse

D. Bassett[1], M. Carcasi[1], W. Printz[1]
[1]Tokyo Electron America, Austin, TX, USA

In semiconductor manufacturing, effective cleaning of structures with liquid is one of the most important and potentially difficult process steps. It is important because it remains the cheapest and most cost-effective method to remove particles and residues from the structures in order ... 詳細を見る

Gravitational Collapse of Rectangular Granular Piles

M.H. Babaei[1], T. Dabros[2], S.B. Savage[3]
[1]Ocean, Coastal, and River Engineering, National Research Council of Canada, Ottawa, ON, Canada
[2]Natural Resources Canada, CanmetENERGY, Devon, AB, Canada
[3]Department of Civil Engineering & Applied Mechanics, McGill University, Montreal, QC, Canada

In this study, the dam-break type two-dimensional gravitational collapse of rectangular granular piles in air was numerically studied. The frictional behavior of the material was based on the von-Mises model with the Mohr-Coulomb yield surface leading to pressure and strain-rate ... 詳細を見る

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... 詳細を見る

Steps for the Optimization of Pipe and Tubing Extrusion Dies

J.R. Puentes[1], T.A. Osswald[1], S. Schick[2], J. Berg[2]
[1]Polymer Engineering Center, University of Wisconsin, Madison, WI, USA
[2]TEEL Plastics, Baraboo, WI, USA

The extrusion of polyolefin pipes suffers degradation due to mechanical design problems of the extrusion die that is commonly used. This study uses numerical and computational approaches to detect problematic areas in the die geometry. Simulations show that in the conventional die there ... 詳細を見る

Evaluation of Internal Electrical Heater for Pipe Temperature Control Using FEA Model

B. Xu[1], M. Heydrich[1], S. Edmondson[1], A. Jahangir [1]
[1]ShawCor Ltd., Toronto, ON, Canada

In oil and gas industries, electrical heaters are often used to control the internal pipe temperature. One important criterion for such test, is to maintain a uniform temperature range during the test. The objective of this study was to evaluate the heat transfer of one design of the ... 詳細を見る

Piezoelectric Buzzer Optimization for Micropumps

A. Garcia[1], A. Marcus[1], F. Tejo[1], C. Precker[1], C. Moreira[2]
[1]Universidade Federal de Campina Grande, Campina Grande, PB, Brazil
[2]Instituto Federal de Alagoas, Maceio, AL, Brazil

Piezoelectric buzzers are low cost devices which can be used successfully as actuators in diaphragm-based micro-pumps. The buzzers are piezoelectric wafers (lead-zirconate-titanate-PZT) that are glued on a brass membrane and they are available within different sizes and thicknesses. For ... 詳細を見る

Determination of the Optical Properties of Individual Gold Nanorods through Numerical Modeling and Experiment

Y. Davletshin[1], J.C. Kumaradas[1]
[1]Ryerson University, Toronto, ON, Canada

The optical scattering and absorption of gold nanorods (GNRs) depends on its size, shape, and surroundings. This dependence is due to both intrinsic and extrinsic effects. A good understanding of this dependence is needed for applications of GNRs in photo-thermal therapy, optical and ... 詳細を見る