Phil Kinnane | November 5, 2015
Cricket is the second most popular sport in the world, but it’s also considered an art. This is seen in the technical abilities required by the batsman to protect his wicket and go on to score runs. It’s also due to the type of bowling used to get the batsman out, which depends on a myriad of physical factors. Here, we investigate one of these techniques — the art of swing bowling.
Phil Kinnane | February 21, 2014
It must be an impressive sight. For people driving through the Mojave Desert from Los Angeles to Las Vegas, the world’s largest solar-based thermal power plant can be seen on the way. The Ivanpah Solar Electric Generation System consists of almost 350,000 garage door-sized mirrors, all pointing the sun’s rays to large boilers at the top of three 33-story tall towers. The result is a 390 MW power station — about a fifth the generation capacity of the Hoover Dam.
Phil Kinnane | November 6, 2013
The COMSOL Conference 2013 Rotterdam was well-attended and highly informative. The keynotes were the high point of the event, and they were excellent examples of multiphysics applications. The sophistication of the modeling work presented by Alwin Verschueren of Philips Research Laboratories in Eindhoven, the Netherlands, and Holger Ernst and Christian Schröder of mieletec FH Bielefeld, Germany, was truly spectacular and kept all the attendees enthralled.
Phil Kinnane | September 9, 2013
Now is the time to start planning your visit to Boston for the COMSOL Conference 2013. If you would like to plan ahead in terms of which presentations to attend, you’ll be happy to hear that the abstracts for the Boston location are now being posted to the COMSOL Conference website. These will soon be followed by the abstracts for the Bangalore and Rotterdam user presentations as well.
Phil Kinnane | April 18, 2013
It’s always been hard to place the field of electrochemistry into a more traditional engineering field. Departments and institutions that focus on electrochemical applications can be found within the faculties of Chemical Engineering, Physics, Materials Science, Physical Chemistry, and even Civil Engineering and Electrical Engineering. I believe this is because electrochemistry is heavily involved in applications that are quite varied — and in some ways quite new. Electrochemical applications need to be studied before they can be understood and optimized, […]
Phil Kinnane | March 14, 2013
About 13% of the world’s power is nuclear. During the 1990′s, this figure was almost 18%. This trend may continue to decline or undergo a renaissance, but in the meantime nuclear waste disposal remains a hot topic among engineers and governmental agencies. Safe procedures for the disposal of nuclear waste have been in place for decades, and continued improvement of these techniques remain in discussion today.
Phil Kinnane | December 6, 2013
The Mixer Module provides ready-made interfaces for describing the difficult problem of laminar and turbulent flows in rotating machinery with free liquid surfaces. COMSOL has been developing different techniques for modeling CFD, moving geometries, and free surfaces during the past few years for a number of different applications. This has now culminated in the new Mixer Module that was released with version 4.4, and it clearly showcases the improved CFD capabilities of COMSOL.
Phil Kinnane | October 14, 2013
On Thursday evening of the COMSOL Conference 2013 Boston, winners of the top papers and posters were presented with their awards. Reading through their papers and posters, I noticed a common theme: they all included experimental validation of their simulation results. While modeling provides crucial insight and understanding, as well as the opportunity to design and optimize your applications and processes, its credibility often depends on whether results test well against known results. The award winners at the multiphysics conference […]
Phil Kinnane | June 12, 2013
My colleague, Edmund Dickinson, recently blogged about cyclic voltammetry, and how this can be modeled. It was a fantastic blog entry, as it really described the application, and how to implement such models in COMSOL Multiphysics. While Edmund has a background in electroanalysis, where cyclic voltammetry, potentiometry, and electrochemical impedance are important tools, I had a different but similar life before COMSOL, working within industrial electrolysis. For both of us, the new Electrochemistry Module would have been the perfect tool […]
Phil Kinnane | March 25, 2013
Dr. Raj Thiagarajan is a prolific producer of interesting research articles ranging from waste-water treatment to acoustics metamaterials, and lots in between. As the Managing Director at ATOA (“Atom TO Application”) Scientific Technologies, a COMSOL Certified Consultant, Raj has had to simulate all types of applications. Now he will show you how to use multiphysics simulations in multimaterial and composite product design.
Phil Kinnane | February 22, 2013
“The Bumblebee Flies Anyway” was a book by Robert Cormier that I read as a young teenager. In it, Cormier describes how bumblebees are natural anomalies as they seemingly do not have the aerodynamic capability to actually fly. Their wing span and flapping speed should not provide enough lift to allow flying, and this is a fact that I have always associated with bumblebees since. Yet, this has been proven not to be true, as a closer investigation of the […]