Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
solution has not converged.
Posted 2010/10/27 10:10 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Dear all
I simulate the temperature field of a closed system using the (ns) and (cc) module, but the results of the simulation can not converge.
Error:
Failed to find a solution:
The relative error (2.2e-005) is greater than the relative tolerance.
Returned solution has not converged.
Best Ragrds
Chuck
I simulate the temperature field of a closed system using the (ns) and (cc) module, but the results of the simulation can not converge.
Error:
Failed to find a solution:
The relative error (2.2e-005) is greater than the relative tolerance.
Returned solution has not converged.
Best Ragrds
Chuck
1 Reply Last Post 2010/10/29 10:51 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello,
Given what you told about the problem :
- either check the definition of your problem, maybe your conditions are unstable, or something like that (checking the convergence plot might help) ;
- or act on the relative tolerance value.
Hope it helps.
--
Y.
Given what you told about the problem :
- either check the definition of your problem, maybe your conditions are unstable, or something like that (checking the convergence plot might help) ;
- or act on the relative tolerance value.
Hope it helps.
--
Y.