Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The integration for flux in internal boundary in comsol

Please login with a confirmed email address before reporting spam

As shown in Attach File, the difference between Figure 1 and figure 2 is that a internal boundary is found in Fig.1. The flux in Fig.2 can be obtained by line integration easily. However, how to obtain the flux in internal boundary?


0 Replies Last Post 2016/12/01 9:17 GMT-5
COMSOL Moderator

Hello Jia Liu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.