Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.


王 松 [1], [2], 唐小金 [2]
[1] 军械工程学院静电与电磁防护研究所, 石家庄,河北,中国
[2] 北京卫星环境工程研究所, 北京,中国

摘要:在太空高能带电粒子作用下,航天器上存在绝缘介质深层充电的危险。介质内沉积电荷导致局部出现强电场(达到107V/m),有可能造成介质击穿放电。一方面,充电过程与介质电导率密切相关,而电导率受温度影响显著,另一方面,介质中的通电导体发热会影响介质的局部温度,于是有必要综合考虑介质中电场与热场的耦合变化过程。对此,我们建立了考虑电场与热场耦合变化的介质深层充电模型,并采用 COMSOL Multiphysics® 软件,实现了数值求解。结果表明,在一定的空间辐射环境下,考虑热场是十分重要的,热导率会对充电结果产生不可忽视的影响。该模型有利于多因素作用下的航天器介质深层充电评估计算。 1. 引言: 近些年,卫星充放电效应得到了广泛关注和研究[1, 2]。太空高能电子会射入航天器绝缘介质中,因为该介质极低电导率(10-15S/m量级),使得内部沉积电荷难以泄放 ...

Model of Microwave-Assisted Thermal Adhesion of Synthetic Leather to a Plastic Substrate

S. Soldatov [1], J. Meiser [2], B. Lepers [1], G. Link [1], J. Jelonnek [3],
[1] Karlsruhe Institute of Technology (KIT, IHM), Karlsruhe, Germany
[2] Carl Meiser GmbH & Co. KG, Albstadt, Germany
[3] Karlsruhe Institute of Technology (KIT, IHM, IHE), Karlsruhe, Germany

The lamination of substrates with thin coatings is commonly used in furniture, automotive and avionic industries. In the lamination process the hot melt adhesives are widely used and typically activated at temperatures from 80°C to 140°C by resistive heating. This requires a heat transfer through the coating and/or the substrate. To make the process more flexible, to decrease its energy ...

Numerical Modeling of Magnetic Field Emissions From am HDD Walkover Locating System

A. Jaganathan [1], J. Montoute [1],
[1] Louisiana Tech University, Ruston, LA, USA

In this paper, numerical modeling of the artificially induced magnetic field from a walk-over locator used to detect the drill head underground in Horizontal Directional Drilling (HDD) is presented. Numerical predictions are compared against the experimental data and closed-form solutions to validate the model. After validations, the numerical model is used to investigate a situation that could ...

Numerical Analysis of the Response of Thick Wires to Extreme Dynamic Electro-Mechanical Loads - new

R. Cunrath[1], M. Wickert[2]
[1]Fraunhofer EMI, Efringen-Kirchen, Germany
[2]Fraunhofer EMI, Freiburg im Breisgau, Germany

Research at Fraunhofer EMI addresses the response of materials in extreme dynamic loads. Besides mechanical or thermal loads, intense electric pulse currents also represent an extreme dynamic load. Experimentally, metallic samples, mainly thick wires, were electro-mechanically loaded with currents up to 400 kA. For this purpose, a test rig containing a high-voltage pulsed power supply and high ...

The Effect of Space Charge due to the Auto-Ionization of Neutral, Hydrogenic States in Point-Contact Germanium Detectors at MilliKelvin Temperatures - new

D. Faiez[1], N. Mirabolfathi[1], B. Sadoulet[1], K. M. Sundqvist[2]
[1]Department of Physics, University of California - Berkeley, Berkeley, CA, USA
[2]Department of Electrical & Computer Engineering, Texas A&M University, College Station, TX, USA

A class of semiconducting detectors, operated at temperature T~50mK, has direct application to the search for dark matter particle, when are able to simultaneously measure both the ionization and phonons created by particle interactions. We explore the effect of space charge accumulation in a germanium p-type point contact detector which arises due to the auto-ionization of hydrogenic ...

Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems

S.M. Musa[1], M.N.O. Sadiku[1], J.D. Oliver[1]
[1]Prairie View A&M University, Prairie View, TX, USA

In this paper an attempt has been made to design and analyze integrated circuit interconnects for unshielded four conductors with three levels system using Finite Element Method (FEM). The computational and simulation work has been carried out with help of COMSOL Multiphysics software. We illustrate that FEM is as accurate and effective for modeling multilayered multiconductor transmission ...

Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation

A.K. Pi?at[1]
[1]AGH University of Science and Technology, Kraków, Poland

Introduction: The dual electromagnet configuration of Active Magnetic Levitation system (AML) where the electromagnets are locate opposite to each other, constitutes and single axis of the Active Magnetic Bearing. The same configuration can be used to test the single electromagnet AML controller. A single electromagnet AML was modeled and simulated with COMSOL Multiphysics. The modeling and ...

Numerical Optimization of Heating for High-Speed Rotating Cup by Means of Multiphysics Modeling and its Experimental Verification - new

K. Kyrgyzbaev[1], M. Willert-Porada[1], M. Terock[1]
[1]University of Bayreuth, Chair of Materials Processing, Bayreuth, Germany

The physics of rotating cups and disks is an important research subject in many areas of engineering. The rotating cup/disk has been employed in many industrial applications such as spin-coating of phosphor on television screens or photoresist films on silicon wafer, concentrating solutions by evaporation, centrifugal atomization of metal melts, and glass flakes production. In this work the ...

Coupling Picosecond Terahertz Pulses to a Scanning Tunneling Microscope

P. H. Nguyen [1], C. Rathje [2], G. J. Hornig [1], V. Jelic [1], C. Ropers [2], F. A. Hegmann [1],
[1] University of Alberta, Edmonton, AB, Canada
[2] 4th Physical Institute, University of Göttingen, Göttingen, Germany

Probing ultrafast processes over subpicosecond and picosecond time scales provides fundamental insight into the nature of materials. We have experimentally demonstrated terahertz (THz)-pulse-induced tunneling in a scanning tunneling microscope (THz-STM) to image surfaces with simultaneous nanometer spatial resolution and subpicosecond time resolution [1]. However, the exact mechanism by which ...

FEM Modeling in Robust Design for Graphene-Based Electromagnetic Shielding

S. Elia [1], G. Granata [1], P. Lamberti [1], V. Tucci [1],
[1] University Of Salerno, Italy

Electromagnetic shielding design is usually approached referring to nominal values of the main parameters. This could lead to malfunctioning devices and its performance differ widely from what was really aimed at or, worse, the final design product could even be physically unrealizable. This work presents a robust approach to the design of EM Shielding based on Graphene (Gph) layers. It is a two ...