Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Multiphase, Dual Polymer Injection Molding and Cooling of an Open Cavity to Form both Distinct and Graduated Material Properties within a Complex Three-Dimensional Body

M.S. Yeoman[1]
[1]Continuum Blue Ltd, Forest Row, United Kingdom

With the advancement of medical devices and implants, many now require more advanced nonlinear, hyper-elastic materials such as elastomers to be extensively utilized in the body. This combined with the need to allow for considerably different, varying and graduated material responses within the three-dimensional device, poses a difficult challenge to manufacturing an elastomeric implant in a ...

Thermal Study of Valve Regulated Lead Acid Batteries and Electronics Chamber Used in Stand-Alone Street Lighting Applications - new

D. Groulx[1], J. Skaalum[1], T. Jamieson[1]
[1]Mechanical Engineering, Dalhousie University, Halifax, NS, Canada

This paper presents a study on the heat generation of Valve-Regulated Lead Acid (VRLA) batteries used in off-grid streetlighting applications from PoleCo, a Halifax based company. One goal of the project was to produce validated COMSOL® models of the enclosure that holds these VRLA batteries. This model can then be used to investigate methods of reducing the temperature of the batteries based on ...

Mathematical Model of Vacuum Foam Drying - new

M. Sramek[1], J. Weiss[2], R. Kohlus[1]
[1]Department of Food Processing Engineering, Institute of Food Science and Biotechnology, Hohenheim University, Stuttgart, Germany
[2]Department of Meat Science and Food Physics, Institute of Food Science and Biotechnology, Hohenheim University, Stuttgart, Germany

The mathematical model is closely related to the development of a novel drying method for high viscous and sticky materials. The foamed state facilitates diffusive moisture transport and therefore accelerating the drying process. Moreover the dried porous material can be easily converted into the powder. The mathematical modelling aimed at evaluating the complex drying process as basic ...

Simulation of Thermomechanical Couplings of Viscoelastic Materials

F. Neff [1], T. Miquel [2], M. Johlitz [1],
[1] Universität der Bundeswehr München, Munich, Germany
[2] École polytechnique, Palaiseau, France

Using COMSOL Multiphysics® software, a new model was implemented with the Physics Builder functionality, which provides a thermomechanical coupling. It consists of two independent physics interfaces, one for the mechanical, viscoelastic behavior and one for the heat transfer. With the multiphysics coupling features it is now possible to add the effects of thermal expansion and dissipation or ...

Analysis of Superheater Tubes with Mutual Irradiation as Applied to a Solar Receiver Steam Generator

N. Lemcoff[1], S. Wyatt[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]Alstom Power, Windsor, CT, USA

The objective of this paper is to analyze the temperature variations within a superheater tube of a solar receiver steam generator. The tube is heated by concentrated, collimated solar irradiation with major cooling by an internal steam flow. The influence of heat loss by radiation, internal convection, and conduction are considered. Analytical models are obtained for an isolated tube, and the ...

Influence of a Refurbishing on an Old Residential Building’s Wall in Paris in Summer: Mass and Heat Transfer Approach - new

K. Azos-Diaz[1], B. Tremeac[2], F. Simon[2], D. Corgier[2], C. Marvillet[1]
[1]Laboratoire de Chimie Moléculaire, Génie des Procédés Chimique et Energétique, Paris, France
[2]MANASLU Ing., Savoie Technolac, Le Bourget du Lac, France

The implementation of thermal insulation in old residential building walls could compromise the hygrothermal behavior of the construction, especially in summer time when it is placed inside. A bad installation of insulation could have consequences on the quality of indoor air conditions and on the health of the wall mostly during hot periods. Thus, the evaluation of heat and mass transfer ...

Thermal Field in a NMR Cryostat - new

A. D'Orazio[1], C. Agostini[1], S. Fiacco[1]
[1]Dipartimento di Ingegneria Astronautica, Elettrica ed Energetica - Sapienza University of Rome, Rome, Italy

Fundamental component of the NMR tomograph is the magnet. By using the property of superconductivity it is possible to achieve an induction field extremely homogeneous, stable and high. To maintain the material below the superconducting critical temperature (7.2K), the coils are immersed in liquid helium at 4K, within a cryostat. In this paper, we present the preliminary results related to the ...

Micromechanical Design of Novel Thermal Composites for Temperature Dependent Thermal Conductivity - new

R. C. Thiagarajan[1],
[1]ATOA Scientific Technologies Pvt. Ltd., Bengaluru, Karnataka, India

Materials with an order variable in thermal conductivity as a function of temperature are desirable for thermoelectric heat energy recovery, building thermal insulation and solar thermal applications. Thermal Conductivity is an inherent material property. Engineering the fundamental thermal conductivity needs manipulation at thermal photon level for conventional materials. Engineering thermal ...

Structural and Environmental Design of a Rainscreen System Using COMSOL Multiphysics

C. Guido Galante [1], M. Donà [2],
[1] Newtecnic Ltd, London, England, UK
[2] University of Cambridge, UK

The subject of the study is a bespoke rainscreen system designed for the Grand Theatre of Rabat, Morocco (Figure 1). The project presents a complex façade geometry and consists of a 1800-seat theater, an open-air amphitheater with a capacity of 7000 people, a rehearsal space and a restaurant. The rainscreen system consists of fiberglass individually cast reinforced concrete (GRC) panels ...

Heat Loss Evaluation of an Experimental Set-up for Predicting the Initial Stage of the Boiling Curve for Water at low Pressure

K. T. Witte[1], F. Dammel[2], L. Schnabel[1], and P. Stephan[2]
[1]Fraunhofer Institut Solare Energiesysteme - Department of Thermal Systems and Buildings, Freiburg, Germany
[2]Technische Universität Darmstadt - Institute of Technical Thermodynamics, Darmstadt, Germany

In this paper heat losses and gains are assessed for a specific measuring set-up improving the validity of performance data to accurately predict the initial stage of a boiling curve. Simulation focus on achieving results predicting real measuring data of a plain surface structure. Therefore, the relevant components of the measuring set-up have been implemented in a 2-D axisymmetric model ...