En-Ming You , Jun Yi , Song-Yuan Ding [1,2],
 State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, China
 Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University, Xiamen, China
Surface-enhanced Raman scattering (SERS) is a fingerprint spectroscopy whose sensitivity is down to single molecule level. The mechanism of SERS is mainly contributed to huge enhancement of local electric field, which originated from surface plasmon resonance of metal nanostructures. It is very important to exactly calculate the local enhancement in the electric field strength for right ...
Sandia National Laboratories, Albuquerque, NM, USA
We have developed Thor: a pulsed power accelerator for performing dynamic material experiments. The design was aided by using the COMSOL Multiphysics® software with the AC/DC Module and RF Module. Our design process involved optimizing the impedance of the system while maintaining a good margin against electrical breakdown. By using a three-dimensional electromagnetic model of the entire power ...
N. Herscovici , A. Boryssenko 
 Air Force Research Lab, Wright-Patterson AFB, OH, USA
 A&E Partnership, Belchertown, MA, USA
The antenna pattern synthesis problem is of the utmost importance in almost every kind of antenna applications. Therefore, a very large number of contributions have appeared on this subject. A number of different implementation methods are well known, and widely used. In this paper we present a new method that takes advantage of the antenna geometry to generate an aperture phase distribution ...
K. Ehrhold, S. Christiansen[1,2], and U. Gösele
Max Planck Institute of Microstructure Physics, Halle, Germany,
Institute of Photonic Technology, Jena, Germany
Plasmonics is a new branch of the fascinating field of photonics and develops concepts to quench light beyond the diffraction limit and enhance electromagnetic fields. These enhancements occur in metals as localized surface plasmon polaritons (LSP) a coupling of the surface density oscillations of the electron gas to the incident light. With threedimensional nano-structures of coinage metals ...
Hyperbolic Heat Transfer Equation for Radiofrequency Heating: Comparison between Analytical and COMSOL Solutions
V. Romero-García, M. Trujillo, M.J. Rivera, J.A. López Molina, and E.J. Berjano
Centro de Tecnologías Físicas Acústica, Universidad Politécnica de Valencia, Valencia, Spain
Dpto. Matemática Aplicada, Instituto Universitario de Matemática Pura y Aplicada, Universidad Politécnica de Valencia, Valencia, Spain
Institute for Research and Innovation on Bioengineering, Universidad Politécnica de Valencia, Valencia, Spain
The Radiofrequency Heating (RFH) is widely employed to heat biological tissue in different surgical procedures. Most models analyze the RFH employing a Parabolic Heat Transfer Equation (PHTE) based on Fourier's theory. The PHTE can be used for problems involving long heating times or low thermal gradients. However, when the problem involves short heating times or extreme thermal gradients it is ...
J.T. Andrews, R.R. Kumar, and P.K. Sen
Department of Applied Physics, S G S Institute Technology & Science, Indore, Maharashtra, India
We report the results of simulation showing light coupling in waveguides through prism coupling method. Prism coupling method of light coupling in waveguides is a dominant method adopted by photonic device fabricators. It is necessary to understand the effect various parameters on light coupling in such processes. We used industry standard PDE solver COMSOL Multiphysics to study and analyze the ...
Topographic Effects on Radio Magnetotelluric Simulations on Levees: Numerical Modeling for Future Comparison With Fields Results
R. Duval, C. Fauchard, R. Antoine
ERA23-IFSTTAR, Laboratoire des Ponts et Chaussées de Rouen, CETE-Normandie Centre, France
We study the topography influence of levees on the electric resistivity signal obtained with the Radio-Magnetotelluric method. Field measurements have been modeled with COMSOL, using the AC/DC and RF Modules. A levee situated in Orléans along the Loire river (France) has been considered in order to design a model tacking account of the skin depth and the incident wavelength, keeping a constant ...
A. Shetty, K. J. Vinoy, S. B. Krupanidhi
Electrical Communication Engineering, Indian Institute of Science, Bangalore, India
Materials Research Centre, Indian Institute of Science, Bangalore, India
As interest in the electromagnetic spectrum expands towards the infrared and terahertz range, the distinct advantages of using semiconductors instead of metals for plasmonic applications must be understood. Plasmonic resonances in gold (Au) and indium nitride (InN) gratings are studied, in the terahertz (?=30µm) regime. The electromagnetic properties of Au and InN are described by the Drude ...
N. Elabbasi , M. Hancock ,
 Veryst Engineering, Needham, MA, USA
Radiofrequency (RF) tissue ablation is commonly used to treat medical conditions involving dysfunctional tissue especially in the heart, kidneys, lungs, bones, or liver. An electrode at the tip of a catheter delivers high frequency current (350-500 kHz) to the targeted tissue causing it to heat and then ablate without disturbing the electrical signals of the nervous system or heart, and with ...
Adam Mickiewicz University, Poznan, Poland
We study the spin wave excitation (coherent precession of magnetic moments) in periodically arranged magnetic stripes, i.e., in one-dimensional magnonic crystal (MC). Two approaches have been implemented. We have defined a structure that dispersion relation can be obtained using both approaches and compared them. In general, the approach I has to be used for MCs where the exchange interactions ...