Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

What is the transient solver of Comsol? FETD or DGTD?

Posted 2017/04/11 23:32 GMT-4 Studies & Solvers 2 Replies

Wending Mai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am interested what kind of solver is used by Comsol transient solver. FETD or DGTD?
It use FEM for stationary solver, right?

Thank you.
2 Replies Last Post 2017/04/12 20:30 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2017/04/12 8:30 GMT-4
COMSOL uses a range of numerical methods depending on the problem. See www.comsol.com/community/forums/general/thread/45905 as well as the documentation.
One of the main news with the upcoming release of 5.3 is the expanded availability of boundary element methods, see www.comsol.com/video/introducing-version-5-3-of-the-comsol-multiphysics-software .
Best regards,
Jeff
COMSOL uses a range of numerical methods depending on the problem. See https://www.comsol.com/community/forums/general/thread/45905 as well as the documentation. One of the main news with the upcoming release of 5.3 is the expanded availability of boundary element methods, see https://www.comsol.com/video/introducing-version-5-3-of-the-comsol-multiphysics-software . Best regards, Jeff
Wending Mai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2017/04/12 20:30 GMT-4
Hi Jeff,

Thank you for your reply.
In the web link, "Several different methods are used in the add-on modules, including finite element analysis, the finite volume method, the boundary element method, and particle tracing methods, but the emphasis of COMSOL Multiphysics is on the finite element method.", but DGTD is not included in the previous disccusion.

To be specific, does COMSOL use DGTD for Transient Electromagnetic Problems?

Because Ansys HFSS uses DGTD as its transient solver, I just want to check out if COMSOL uses the same kind of solver.

Thank you.


Hi Jeff, Thank you for your reply. In the web link, "Several different methods are used in the add-on modules, including finite element analysis, the finite volume method, the boundary element method, and particle tracing methods, but the emphasis of COMSOL Multiphysics is on the finite element method.", but DGTD is not included in the previous disccusion. To be specific, does COMSOL use DGTD for Transient Electromagnetic Problems? Because Ansys HFSS uses DGTD as its transient solver, I just want to check out if COMSOL uses the same kind of solver. Thank you.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content