Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

light input models

Please login with a confirmed email address before reporting spam

Sir



How to add light as a input to the models



Yours faithfully
kartikeya

1 Reply Last Post 2011/02/16 1:18 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/02/16 1:18 GMT-5
Hi

I believe you need to be somewhat more precise on what you are doing to help us help you ;)

if you are in RF/optics and have defined a model, to get some energy in you need to define a E field somewhere on your boundary

--
Good luck
Ivar
Hi I believe you need to be somewhat more precise on what you are doing to help us help you ;) if you are in RF/optics and have defined a model, to get some energy in you need to define a E field somewhere on your boundary -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.