Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to plot the stress on the surface?

Posted 2011/02/16 2:24 GMT-5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.1 1 Reply

Byeong Gyun Oh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

Is there any option which plots stresses including directions and magnitudes simultaneously?



Thanks

1 Reply Last Post 2011/02/16 2:34 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/02/16 2:34 GMT-5
Hi

you can add arrow plots on top, right click the Results Plot Group node

--
Good luck
Ivar
Hi you can add arrow plots on top, right click the Results Plot Group node -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content