Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problems with diffusion model
Posted 2011/05/03 10:15 GMT-4 Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I am having some problems with a model that I am making in the MEMs module. I want to simulate a micro mixer, and the simulation that I make does run, however the results of the mixing are too fast if compared to the real work. I am taking the diffusion coefficient in the order of 1e-10, and also the isotropic diffusion const as 0.008, still the mixer simulations give a very fast mixing. Please provide some suggestions on this matter.
Hello Syed Haider Jawad Abidi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.