Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Missing term in help on solute transport
Posted 2011/06/22 3:34 GMT-4 Porous Media Flow, Modeling Tools & Definitions Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
It seems there's a missing term on LHS of Eq.3.3 in help page:
Earth Science Module > The Solute Transport Interface > Theory for the Solute Transport Interface
the missing term is div(cu), which appears correctly in the rest of the equations in that page.
Earth Science Module > The Solute Transport Interface > Theory for the Solute Transport Interface
the missing term is div(cu), which appears correctly in the rest of the equations in that page.
1 Reply Last Post 2011/06/22 8:58 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Amir,
That term is indeed missing from equation 3-3 in the documentation. Thanks for bringing this to our attention! This will be corrected in the next version of the Subsurface Flow Module (which replaces the Earth Science Module in version 4.2).
Best regards,
Magnus Ringh, COMSOL
That term is indeed missing from equation 3-3 in the documentation. Thanks for bringing this to our attention! This will be corrected in the next version of the Subsurface Flow Module (which replaces the Earth Science Module in version 4.2).
Best regards,
Magnus Ringh, COMSOL