Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

magnetics (mf) question

Posted 2011/06/24 11:01 GMT-4 Low-Frequency Electromagnetics Version 4.1 1 Reply

David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi

in a magnetics (mf) problem If I have a conducting domain with a varying cross section

and I wish to inject a given current as an initial condition.

How do I define the external current density so that I have the same current in any cross section?

thanks

David
1 Reply Last Post 2011/06/28 7:02 GMT-4
Akmal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/06/28 7:02 GMT-4
hi,

on ec there is node called external current density, there is also boundary current source.
just give 1[A]/boundaryarea[mm^2]. in every cross section the current should be the same, but current density not.

regards
akmal
hi, on ec there is node called external current density, there is also boundary current source. just give 1[A]/boundaryarea[mm^2]. in every cross section the current should be the same, but current density not. regards akmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content