Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Periodic boundary condition at multiphysics interface.
Posted 2011/07/26 3:48 GMT-4 Acoustics & Vibrations, Heat Transfer & Phase Change Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
I am working with Comsol to solve a Thermoacoustic problem (Simulation of a thermoacoustic refrigerator).Here I have two domains (I am simulating a stack). In one domain I have thermoacoustic process and in other there is heat transfer.I want to specify a periodic boundary condition for the heat transfer domain .This periodic condition is the solution from Thermoacoustic analysis. It will be very helpful if someone can explain me how to provide such boundary conditions.Also, is it possible to obtain frequency domain solutions for this case? Hope someone will help me.
Vishnu
Hello Vishnu R Unni
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.