Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
fuel cell porous electrode
Posted 2011/10/05 2:55 GMT-4 Battery Design Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to model a fuel cell porous electrode and I am using TCDEE, Darcy's Law and Heat transfer in porous media interfaces.
I have to define the Hear Source (Q) which is a function of the current density (i), the electrolyte potential (phil) and the electrode potential (phis).
Q=f(di/dx, dphil/dx, dphis/x)
However, the current density, phis and phil are given by the TCDEE, how can I define the expression for Q if I do not know these variables?
I have tried with
di/dx=mod1.tcdee.ilocx
dphil/dx=mod1.tcdee.philx
dphis/dx=mod1.tcdee.phisx
but it does not work.
Could anyone help me?
Thanks in advance,
Belén
Hello María Belén Amunategui
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.