Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Limitation in the number of answers in a time dependent model
Posted 2012/01/29 23:03 GMT-5 Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
I am running a time dependent simulation in the Rotating machinery-laminar flow module. I am using the BDF (Backwards differential formula) method. I am try to find the time in which the velocity of my model stabilizes. I ran three different simulations with a time step of 0.1 during 5 s, 10 s and 20s . However, I am obtaining the same answers for the three models, because COMSOL is giving me just the first 50 time step solutions, which means the answers for the first 5 seconds.
Is there something should I modify in COMSOL to obtain more data, or does it mean that after 5 seconds the model is stable and for this reason COMSOL is not giving me any more solutions?
Is there something should I modify in COMSOL to obtain more data, or does it mean that after 5 seconds the model is stable and for this reason COMSOL is not giving me any more solutions?
1 Reply Last Post 2012/01/30 1:23 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
read carefully the doc about the time stepping solver, and try time step "intermediate or strict in the time stepping tab of your transient solver sub-node
--
Good luck
Ivar
read carefully the doc about the time stepping solver, and try time step "intermediate or strict in the time stepping tab of your transient solver sub-node
--
Good luck
Ivar