Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Identity Mapping question

Posted 2012/02/08 9:33 GMT-5 Parameters, Variables, & Functions Version 4.2a 1 Reply

David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

In source and destination frames options of Identity mapping there is Mesh , Spatial, Material and Geometry.

What is the meaning of "Geometry" here?

thanks

David
1 Reply Last Post 2012/02/08 17:11 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/02/08 17:11 GMT-5
Hi

most of these frames superpose, the geometry frame (new in 4.2) is linked to the DG "physics" and starts its "own life" when you use DG in a model

--
Good luck
Ivar
Hi most of these frames superpose, the geometry frame (new in 4.2) is linked to the DG "physics" and starts its "own life" when you use DG in a model -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content