Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Temperature circulation in DC Arc Furnace

Posted 2012/03/15 6:36 GMT-4 Low-Frequency Electromagnetics, Fluid & Heat, Heat Transfer & Phase Change Version 4.2a 0 Replies

Heigo Mõlder
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working on a simulation of DC electric arc furnace on Comsol 4.2a, and I have come to a problem on how to calculate temperature circulation. I have a very simple model of electric DC arc furnace, with is three top electrodes, supply voltage U = 100 V and grounded three bottom electrodes. I used Joule Heating Module to make a solution on temperatures which are caused by current passing through metal - it is working very well.

Next, I would like to proceed with simulation of metal flow due to temperature effects. Here I have some problems. First, I do not know which module to choose in order to calculate the circulation of metal caused by temperature difference in different locations. At this time it seems to me that when I choose whatever thermal simulation modules, first on would need to define a domain which is the heat source and then another domain where the circulation takes place. But my model the domain I would like to use as temperature source is also the environment where I want to look at circulation caused by temperature differences. Could I ask for your help with selecting the correct thermal module to work with and also some hints on its usage would be welcome?
0 Replies Last Post 2012/03/15 6:36 GMT-4
COMSOL Moderator

Hello Heigo Mõlder

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content