Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Values of Relative and Absolute tolerances

Posted 2012/03/15 12:17 GMT-4 Version 4.2, Version 4.2a 0 Replies

Tushar Gulati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all

I am working on a problem that solves for Pressure (p) using the Darcy' Law and the displacements (u) from Solid Mechanics. Should I keep different values for absolute and relative tolerances for the two variables since their orders of magnitudes are 1e5 and 1e-3 for pressure and displacements, respectively?

Also, does it have anything to do with the check box "Update Scale absolute tolerance" in the Time Stepping node in the Time dependent Solver?

Thanks and Regards

-Tushar
0 Replies Last Post 2012/03/15 12:17 GMT-4
COMSOL Moderator

Hello Tushar Gulati

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content