Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Defining initial condition

Posted 2012/03/20 4:39 GMT-4 Heat Transfer & Phase Change Version 4.2 0 Replies

JiYoung Park
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to define 2 different initial condition for 2 different domains,

one from previous solution and the other from defining present value.

But I found that I can't define present initial value after defining previous value.
(Study>Solver configuration>Dependent variable>Intial values solved for>Method:solution>Solution>solver1>Times)


The whole initial condition was defined from just previous value.

Please help.

Thanks.
0 Replies Last Post 2012/03/20 4:39 GMT-4
COMSOL Moderator

Hello JiYoung Park

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content