Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Phase-field simulation of phase separation
Posted 2012/05/25 12:15 GMT-4 Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 3.5a, Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
Hi
I am looking at simulating a phase evolution. What I'm trying to do is very similar to the demo tutorial for the phase field module: www.comsol.eu/products/tutorials/phasefield_35/.
However, in this specific tutorial, the two individual liquids are equal in volume (1:1). I would want to simulate the same phenomenon with two liquids in the ratio (2:1), i.e I want the mixture to contain one liquid in more quantity than the other. Can you please let me know what parameter should I change?...
--
sha
Hello Sha
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.