Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

nice features about version 4.3

Posted 2012/06/20 22:46 GMT-4 Version 4.3 6 Replies

Jim Freels mechanical side of nuclear engineering, multiphysics analysis, COMSOL specialist
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

This new thread is to generate some positive feedback to the COMSOL developers on the great new version 4.3. I thought version 4.2a could not be topped in dramatic impact, but now I am really thinking that version 4.3 could be the best version ever.

So, how about it user community ? Let's hear what you really like about version 4.3.

I will start with something very simple.

The stop button really works now in client-server mode. I am connected to a COMSOL server, I click "stop", and it responds back within seconds. Before version 4.3, it could sometimes take several long minutes to get back the model tree I/O.

How about you ? What is your favorite (or more than one item) new feature or corrected feature now in Version 4.3 ?
6 Replies Last Post 2012/07/10 18:24 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/06/21 0:56 GMT-4
Hi James

well for me the CD is now at my office, but I'm out travelling, so I havnt yet had time to test it, (eager too ;)
but from what I have seen on the webinars, for me one of the nicest new features will be the conditional switching of the BC linked to multiple studies

My wish list today is still rather long, so I'll take rapidly a first run over them and come bakc later again

But I do also agree, COMSOL's developpes are really doing it well, the tool is getting better and better, and we can do more and more complex physics in a simpler way, thanks again to them.

Never having had so fun doing physics (and PDE's in 35+ years ;) and I hope I can still double this time now

--
Have fun COMSOLing
Ivar
Hi James well for me the CD is now at my office, but I'm out travelling, so I havnt yet had time to test it, (eager too ;) but from what I have seen on the webinars, for me one of the nicest new features will be the conditional switching of the BC linked to multiple studies My wish list today is still rather long, so I'll take rapidly a first run over them and come bakc later again But I do also agree, COMSOL's developpes are really doing it well, the tool is getting better and better, and we can do more and more complex physics in a simpler way, thanks again to them. Never having had so fun doing physics (and PDE's in 35+ years ;) and I hope I can still double this time now -- Have fun COMSOLing Ivar
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/06/21 7:43 GMT-4
I have a soft spot for basic features that everyone, regarding of their field of work, can enjoy.
Here's a neat new feature that you may not have discovered yet: by right-clicking on the top physics node in the Model Builder and selecting "Sort by Space Dimension", you can now visually separate terms corresponding to volume terms in the equations from those corresponding to surface terms/line terms/point terms.
I have a soft spot for basic features that everyone, regarding of their field of work, can enjoy. Here's a neat new feature that you may not have discovered yet: by right-clicking on the top physics node in the Model Builder and selecting "Sort by Space Dimension", you can now visually separate terms corresponding to volume terms in the equations from those corresponding to surface terms/line terms/point terms.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/06/25 11:04 GMT-4
hello agin

what about the load cases :) ideal for multiple loads and load combinations, even with weight adjsutments

OK you need to dig deep into the 1200+ pages to find how to use them, but with a good indexer on the pdf you find nicely your way

--
Good luck
Ivar
hello agin what about the load cases :) ideal for multiple loads and load combinations, even with weight adjsutments OK you need to dig deep into the 1200+ pages to find how to use them, but with a good indexer on the pdf you find nicely your way -- Good luck Ivar
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/06/27 16:31 GMT-4
Hi
another nice ting in 4.3, once you have meshed partly your model, you can activate the selection view and you see which entities are already meshed, and if you are missing some entities

--
Good luck
Ivar
Hi another nice ting in 4.3, once you have meshed partly your model, you can activate the selection view and you see which entities are already meshed, and if you are missing some entities -- Good luck Ivar
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/07/10 12:09 GMT-4
I recently discovered the new Mesh Control features under Geometry->Virtual Operations. These features provide much better control over meshing by creating virtual domains, faces, edges or vertices solely for the purpose of meshing. Very useful!
I recently discovered the new Mesh Control features under Geometry->Virtual Operations. These features provide much better control over meshing by creating virtual domains, faces, edges or vertices solely for the purpose of meshing. Very useful!
Jim Freels mechanical side of nuclear engineering, multiphysics analysis, COMSOL specialist
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/07/10 18:24 GMT-4
I just recently started using the double dogleg on a FSI problem and discovered this new solver really improves the ability to solve a problem I could not solve before.
I just recently started using the double dogleg on a FSI problem and discovered this new solver really improves the ability to solve a problem I could not solve before.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content