Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Eddy current in 2D Generator

Posted 2012/07/10 13:19 GMT-4 Low-Frequency Electromagnetics Version 4.2 0 Replies

Kamel Boughrara
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,
There is a 2D model of permanent magnet generator in model library of comsol 4.2.

Is it possible to determine eddy current in permanent magnet if I give a value different to zero to a permanent magnet conductivity ?

In this model there are two steps in the study: first step is stationary and the second is time dependent.

Thanks in advance for any help

Kamel Boughrara

0 Replies Last Post 2012/07/10 13:19 GMT-4
COMSOL Moderator

Hello Kamel Boughrara

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content