Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CAD import Module has stopped working

Posted 2012/10/22 12:07 GMT-4 Version 4.2 2 Replies

Wenbo Liu

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

tried to import solidworks file ( no solidworks in my computer)

then the import module crashed

following info is presented

COMSOL CAD IMPORT MODULE HAS STOPPED WORKING

Problem signature:
Problem Event Name: APPCRASH
Application Name: readsolidworks.exe
Application Version: 4.2.1.110
Application Timestamp: 4e84ba52
Fault Module Name: SpaACIS.dll
Fault Module Version: 21.0.3.11027
Fault Module Timestamp: 4d41c898
Exception Code: c0000005
Exception Offset: 000ae200
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 4105
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

2 Replies Last Post 2012/10/22 16:30 GMT-4

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

if you have the correct CAD import module you can read Parasolid files *.X_T or .X_B, and those are easily saved from SW. I believe you need the Livelink to read hte *.sldprt files

--
Good luck
Ivar

Wenbo Liu

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Thx for reply ^^

I saved the file into X_T and successfully import the model

thank you very much!!!

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

CAD import Module has stopped working

Suggested Content