Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

General Projection Operator (3D model)

Posted 2023/07/11 13:07 GMT-4 Porous Media Flow, Results & Visualization, Physics Interfaces 1 Reply

Mengly Long
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I would like to analyze my 3D result in 1D. An instruction has been provided on how to analyze 3D to 2D. However, there hasn't been any instruction yet on how to further analyze the result to 1D.

Did anyone know or experience in projecting the 3D result to 1D using two projection operators simultaneously? Please kindly share your thought. I am currently struggling to solve this problem.

Any suggestions or responses would be greatly appreciated

1 Reply Last Post 2023/07/14 5:38 GMT-4
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 2023/07/14 5:38 GMT-4

I have done 3D>2D>1D>2D>3D mapping (https://www.acculution.com/single-post/axial-symmetrical-decomposition-in-comsol-multiphysics) so yes, it can be done, but you need to put down the math on paper to show what you are trying to achieve.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
I have done 3D>2D>1D>2D>3D mapping (https://www.acculution.com/single-post/axial-symmetrical-decomposition-in-comsol-multiphysics) so yes, it can be done, but you need to put down the math on paper to show what you are trying to achieve.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content