role of spring foundation in contact analysis

Please login with a confirmed email address before reporting spam

What role does a 'spring foundation' applied to a boundary play in contact analysis, even when there's no such spring force existing in the original model?


2 Replies Last Post 2024/03/31 1:22 GMT-4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 month ago 2024/03/28 8:40 GMT-4

It is sometimes used for stabilizing parts of structures that have possible rigid body modes in the initial configuration (before contact is established).

From version 6.2, a better approach is to add a Stabilization subnode under Contact.

-------------------
Henrik Sönnerlind
COMSOL
It is sometimes used for stabilizing parts of structures that have possible rigid body modes in the initial configuration (before contact is established). From version 6.2, a better approach is to add a *Stabilization* subnode under *Contact*.

Please login with a confirmed email address before reporting spam

Posted: 4 weeks ago 2024/03/31 1:22 GMT-4

Thank you Dr Sönnerlind!

Thank you Dr Sönnerlind!

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.