Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Hyperelastic anisotropic material modeling problem

Posted 2013/01/31 15:15 GMT-5 1 Reply

Kun Gou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a hyperelastic anisotropic modeling problem. There is a swelling for the the body. That is to say, the determinant of the deformation gradient equals a fixed constant other than 1. Does anyone knows how to impose such constraint in Comsol? Thanks for your answers.
1 Reply Last Post 2013/01/31 16:17 GMT-5
David Quinn Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/01/31 16:17 GMT-5
You can simulate the effect of swelling by adding thermal expansion to the hyperelastic material
You can simulate the effect of swelling by adding thermal expansion to the hyperelastic material

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content