Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Constitutive law for linear elastic isotropic material in large deformation
Posted 2010/04/15 7:19 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
I was not able to identify the constitutive law used for solid linear elastic isotropic material when the large deformation option is selected.
Is it the Kirchhoff-St. Venant law: Sx=(lambda)trE I + 2(mu)E
where Sx is the Piola-Kirchhoff II stress tensor, E is the Green strain, I the identity tensor and lambda and mu the Lamé constants?
Thanks.
Dominique
Is it the Kirchhoff-St. Venant law: Sx=(lambda)trE I + 2(mu)E
where Sx is the Piola-Kirchhoff II stress tensor, E is the Green strain, I the identity tensor and lambda and mu the Lamé constants?
Thanks.
Dominique
1 Reply Last Post 2010/04/16 7:39 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I beleive the best reply is in the doc is like here:
page 7 SMEUG.pdf V3.5a as well as p165 and on, 173 and on
note some limitation with viscuoelastic material model
check also the smeref.pdf "large deformations" for the different application modes
good luck
Ivar
I beleive the best reply is in the doc is like here:
page 7 SMEUG.pdf V3.5a as well as p165 and on, 173 and on
note some limitation with viscuoelastic material model
check also the smeref.pdf "large deformations" for the different application modes
good luck
Ivar