Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electric machine rotate (syncron machine), with permanent magnets
Posted 2010/04/28 11:54 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I´m simulating a Syncron machine with permanent magnets. And, i want to put corrent in the windings , by voltaje. But i need to declare some constant or some expresion but i don´t find the correct way.
So, If someone have the same problem or is interested in it, please, contact to me.
Thanks in advance.
De la Rosa, Alberto
I´m simulating a Syncron machine with permanent magnets. And, i want to put corrent in the windings , by voltaje. But i need to declare some constant or some expresion but i don´t find the correct way.
So, If someone have the same problem or is interested in it, please, contact to me.
Thanks in advance.
De la Rosa, Alberto
1 Reply Last Post 2010/04/30 2:03 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I would say it will depend somewhat on how you have set up your model, there are many examples in the doc, go through them, I know it takes time, we have all passed by there, but there is so much to learn, that you need to correctly feel the physics and the Comsol-way, and that you really only get by performing exercices
Good luck
Ivar
I would say it will depend somewhat on how you have set up your model, there are many examples in the doc, go through them, I know it takes time, we have all passed by there, but there is so much to learn, that you need to correctly feel the physics and the Comsol-way, and that you really only get by performing exercices
Good luck
Ivar