Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How can I input a heavy oil properties?
Posted 2010/09/19 17:13 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am trying to use COMSOL to simulate a reservoir, but there is no related materials in library built-in.
For example, how can I input the saturation, permeability and temperature-dependent conductivity?
Whether can I use matlab to define the above properties?
or I should build a file with *.txt format then import it? If so, what kind of the txt file should be like?
Thank you very much.
I am trying to use COMSOL to simulate a reservoir, but there is no related materials in library built-in.
For example, how can I input the saturation, permeability and temperature-dependent conductivity?
Whether can I use matlab to define the above properties?
or I should build a file with *.txt format then import it? If so, what kind of the txt file should be like?
Thank you very much.
1 Reply Last Post 2010/09/20 5:40 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
try a piecevise funtion to define your parameters, this is described in the doc with a few examples
--
Good luck
Ivar
try a piecevise funtion to define your parameters, this is described in the doc with a few examples
--
Good luck
Ivar