Submodeling with Plasticity
Application ID: 108811
In this tutorial model, it is demonstrated how to incorporate a localized nonlinearity in a submodel.
In this case, an initial elastic analysis reveals that a small region of a structure has stresses above the yield limit. To improve the results, an elastoplastic material model is added in a submodel.
The global model is in this case analyzed using linear elasticity, but this is not a necessary assumption.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® and
- either the ジオメカニクスモジュール, or 非線形構造材料モジュール and
- either the MEMS モジュール, or 構造力学モジュール
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the 製品仕様一覧 and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.