アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効なCOMSOLライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
Buckling of HDPE Liners
In this example, the Bergstrom–Bischoff material model is used to model the temperature and strain dependent behavior of High Density Polyethylene (HDPE) used, for example, to make liners for damaged pipes in oil and gas applications, or to make type IV hydrogen storage vessels for fuel ... 詳細を見る
Tutorial model for Local Thermal Non-Equilibrium interface
This tutorial model shows how to use the Local Thermal Non-Equilibrium interface. 詳細を見る
Verifying the Friis Transmission Equation with FEM–BEM Coupling
In this model, the transmitter (microstrip patch) and receiver (Yagi–Uda) antennas are modeled simultaneously in the FEM domain and are coupled with FEM–BEM coupling. The results are compared with the analytical Friis transmission formula. In detail, the emw and emw2 interfaces find out ... 詳細を見る
Small Punch Test for Ultrahigh Molecular Weight Polyethylene
Ultrahigh Molecular Weight (UHMW) Polyethylene is a material commonly employed in knee and hip joint replacements. The “small punch test” is designed to assess mechanical properties using very small samples, such that because of their size they can directly be explanted. This example ... 詳細を見る
Geometric Parameter Optimization of a Tuning Fork
This model computes the fundamental eigenfrequency and eigenmode for a tuning fork that is synchronized from Inventor via the LiveLink interface. The length of the fork is then optimized so that the tuning fork sounds the note A, 440 Hz. 詳細を見る
Response of a Rotor Under the Influence of Seal Forces
The fluid flow in seals causes a strong restoring radial force, opposing the shaft motion. Also, there is a cross coupled force due to the axial variation of the circumferential flow. The first type of force always has a stabilizing effect on the rotor, whereas the second one in certain ... 詳細を見る
Normal Modes of a Biased Resonator — 3D Geometry from a GDS-File
This tutorial demonstrates how to build the geometry for the 3D biased resonator from GDS file using the ECAD Import Module and the Design Module. The procedure emulates semiconductor and MEMS fabrication processes to build 3D geometry more efficiently and is more intuitive for those ... 詳細を見る
Fast Modeling of a Transmission Line Wilkinson Power Divider
Some conventional three-port power dividers are resistive power dividers and T-junction power dividers. Such dividers are either lossy or not matched to the system reference impedance at all ports. In addition, isolation between two coupled ports is not guaranteed. The Wilkinson power ... 詳細を見る
Radiative Cooling of a Glass Plate with Wavelength-Dependent Radiative Properties
A glass melt is cooled down by radiation to form the final shape. Wavelength dependence of radiative properties is considered in the first study; its effects on the temperature field is emphasized by comparison with results obtained in the second study wherein equivalent (constant) ... 詳細を見る
Designing a Waveguide Diplexer for the 5G Mobile Network using Shape Optimization
A diplexer is a device that combines or splits signals into two different frequency bands, widely used in mobile communication systems. This example simulates splitting properties using a simplified 2D geometry. The geometry is optimized using shape optimization in order to get the ... 詳細を見る