ビデオギャラリ

    COMSOL Multiphysics®
  • 電磁気
  • 構造と音響
  • 流体と熱
  • 化学
  • 多目的
  • インターフェース

特集ビデオ


再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

再生時間: 20:06

Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development

Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 21:33

Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR

In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how. The Selection List window displays ...

211–223 of 223
最後

再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

再生時間: 20:06

Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development

Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 21:33

Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR

In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.

The Selection List window displays ...

再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

再生時間: 20:06

Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development

Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 21:33

Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR

In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.

The Selection List window displays ...

211–223 of 223
最後