Video Gallery

    COMSOL Multiphysics®
  • 電磁気
  • 構造と音響
  • 流体と熱
  • 化学
  • 多目的
  • インターフェース

特集ビデオ

Clear All

再生時間: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials. Watch chapter 2: Adding ...

再生時間: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model. Watch chapter 3: ...

再生時間: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

再生時間: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

再生時間: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

再生時間: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how. The Selection List window displays ...

91–105 of 105
最後

再生時間: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

再生時間: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...

再生時間: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

再生時間: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

再生時間: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

再生時間: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.

The Selection List window displays ...

再生時間: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

再生時間: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...

再生時間: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

再生時間: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

再生時間: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

再生時間: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

再生時間: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

再生時間: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

再生時間: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

再生時間: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

再生時間: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

再生時間: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

再生時間: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

再生時間: 3:28

Performing a Parametric Sweep Study in COMSOL Multiphysics

In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...

再生時間: 2:41

Identify Geometric Entities in a Model Using the Selection List

To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.

The Selection List window displays ...

91–105 of 105
最後