Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to simukate capacitive pressur sensor with comsol

Posted 2016/04/08 0:44 JST Version 5.0 2 Replies

Islam Aoufi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i have a probleme with comsol please send me how i use it
2 Replies Last Post 2016/05/25 9:07 JST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016/04/08 0:51 JST
Here is a good starting point:
www.comsol.com/model/capacitive-pressure-sensor-476
Best,
Jeff
Here is a good starting point: https://www.comsol.com/model/capacitive-pressure-sensor-476 Best, Jeff
Islam Aoufi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016/05/25 9:07 JST
hi jeff
please help me in this probleme, i want to build a geometry circular but i d'ont know how .
hi jeff please help me in this probleme, i want to build a geometry circular but i d'ont know how .

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content