Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

user-defined solver in COMSOL

Posted 2017/02/12 7:27 JST API, Simulation Apps, Studies & Solvers 1 Reply

Jesus Martinez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can I program my own solver and use it with the COMSOL API?
1 Reply Last Post 2017/02/14 16:51 JST
Lars Gregersen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017/02/14 16:51 JST
Hi Jesus

It depends on how good you are at programming!

Using the Comsol API you can extract the system matrices for a given system (stiffness matrix, load vector etc.). You can use you own solvers for solving the problem.

If you have LiveLink for Matlab you can use the function mphmatrix to extract the matrices you need.


--
Lars Gregersen
Comsol Denmark


Can I program my own solver and use it with the COMSOL API?




Hi Jesus It depends on how good you are at programming! Using the Comsol API you can extract the system matrices for a given system (stiffness matrix, load vector etc.). You can use you own solvers for solving the problem. If you have LiveLink for Matlab you can use the function mphmatrix to extract the matrices you need. -- Lars Gregersen Comsol Denmark [QUOTE] Can I program my own solver and use it with the COMSOL API? [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content