Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Structural Analysis with Thin Elastic Layers Example Model File

Posted 2018/02/22 5:50 GMT-5 Structural & Acoustics, Parameters, Variables, & Functions Version 5.3 1 Reply

Osman Sayginer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to understand the Thin Elastic Layer.

I have seen this article [1], however the model Composite Piezoelectric Transducer [2] mentioned in the article does not have a Thin Elastic Layer.

Is there an example model file?

  1. https://www.comsol.com/blogs/structural-analysis-with-thin-elastic-layers
  2. https://www.comsol.com/model/composite-piezoelectric-transducer-503

Thank you Best regards, Osman

1 Reply Last Post 2018/02/22 11:37 GMT-5
Osman Sayginer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018/02/22 11:37 GMT-5
Updated: 6 years ago 2018/02/23 1:49 GMT-5

I have found the following example. You can refer it.

https://www.comsol.com/model/heating-circuit-465

I have found the following example. You can refer it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content