Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Permanent magnet orientation
Posted 2018/05/10 10:13 GMT-4 Low-Frequency Electromagnetics Version 5.3 2 Replies
Please login with a confirmed email address before reporting spam
Hello, I'm modeling a Permanent Magnet Machine, and I want to change the orientation of the magnets to have the same orientation as in the figure that is attached, anyone could help me?
Regards, João Oliveira
Attachments:
Please login with a confirmed email address before reporting spam
Hi,
The magnetization can be done using the cylindrical co-ordinate system as done in this Magnetic Gear model. See the blog post and associated model files. https://www.comsol.com/blogs/modeling-magnetic-gears-in-comsol-multiphysics/
Best Regards, Nirmal
Please login with a confirmed email address before reporting spam
Hi,
The magnetization can be done using the cylindrical co-ordinate system as done in this Magnetic Gear model. See the blog post and associated model files. https://www.comsol.com/blogs/modeling-magnetic-gears-in-comsol-multiphysics/
Best Regards, Nirmal
Hi Nirmal, Thanks for your reply, now I got it.
Best regards João Oliveira