Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Locked This discussion was locked by a forum moderator.

Element type (Interpolation) in COMSOL 4.1

Posted 2011/05/27 21:01 JST Mesh Version 4.0a, Version 4.1 2 Replies

Sebastian Gatzka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello World.

How can I change the interpolation type of my element in Version 4.1 of COMSOL.
I would like to switch between linear, quatratic and cubic interpolation schemes in the elements but have not found the switch yet.

Thanks!
Sebastian
2 Replies Last Post 2011/05/27 21:38 JST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/05/27 21:24 JST
First, make sure you have "Show More Options" on in the View Menu. Then look for the Discretization tab (see attached file).
First, make sure you have "Show More Options" on in the View Menu. Then look for the Discretization tab (see attached file).

Attachments:

Sebastian Gatzka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/05/27 21:38 JST

First, make sure you have "Show More Options" on in the View Menu. Then look for the Discretization tab (see attached file).


Great! Thank you!
[QUOTE] First, make sure you have "Show More Options" on in the View Menu. Then look for the Discretization tab (see attached file). [/QUOTE] Great! Thank you!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content