Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

finding cordinates

Please login with a confirmed email address before reporting spam

hi,

i use level set method for two phase modelling, as you know this method is based on the fixed mesh, after some times there is a deformation on one of my fluid domain and I want to know the new coordinates of the interface. how can I do that ?

As the time goes on, the interface will change. Is there any way that I can find out the new coordinates of the interface. for example a droplet in an electric field elongates

Best


1 Reply Last Post 2011/06/14 13:23 GMT-4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/06/14 13:23 GMT-4
Test message
Test message

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.