Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
3d to 2d issues
Posted 2011/10/20 9:59 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hello all,
I have a complex 3D geometry that was cut to 2D in SolidWorks. The resulting .sldprt file seems to contain a geometry that is formally still 3D in that all y-coordinates are now equal to zero. I cannot import this into a Comsol 2D geometry but only a 3D geometry. How can I convert this to a proper 2D dataset that Comsol will recognize. The info is all there, I just have to get rid of the y-coordinate somehow. Any ideas? Thank you!!
I have a complex 3D geometry that was cut to 2D in SolidWorks. The resulting .sldprt file seems to contain a geometry that is formally still 3D in that all y-coordinates are now equal to zero. I cannot import this into a Comsol 2D geometry but only a 3D geometry. How can I convert this to a proper 2D dataset that Comsol will recognize. The info is all there, I just have to get rid of the y-coordinate somehow. Any ideas? Thank you!!
1 Reply Last Post 2011/10/20 11:07 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you need to convert it to DXF in SolidWorks, then you can import it in COMSOL 2D (which now accepts Z=0.
Note you might need to orient it in x-y, not sure (European way Z towards the sky and not Y helps quite a lot for the default orientations)
--
Good luck
Ivar
you need to convert it to DXF in SolidWorks, then you can import it in COMSOL 2D (which now accepts Z=0.
Note you might need to orient it in x-y, not sure (European way Z towards the sky and not Y helps quite a lot for the default orientations)
--
Good luck
Ivar