Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving mesh does not affect heat transfer calculation

Please login with a confirmed email address before reporting spam

I'm using moving mesh module to simulate an object sliding on top of a static one in heat transfer in solids module.

I want to see how the motion of the top object deforms temperature distribution in the system. Despite the motion of the top object, heat transfer is calculated as if it was static in its initial position. The temperature distribution is plotted with the top objected displaced as it should after motion, but the distribution itself is displaced with the object and not affected by the motion.

So it seems that the motion of the top object using the moving mesh module is not reflected in the heat transfer calculation.



0 Replies Last Post 2019/08/13 11:46 GMT-4
COMSOL Moderator

Hello Michael Chasnitsky

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.