Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Does Comsol support PML for elastic waves and vibrations?

Posted 2021/03/19 11:06 GMT-4 Structural & Acoustics, Acoustics & Vibrations 1 Reply

Yiliang Bao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am considering to use Comsol for my simulation of elastic wave propagation in solids. I need to set up perfectly matched layers but I wonder if Comsol supports PML for elastic waves and vibrations. If so, do you have any examples?

1 Reply Last Post 2021/03/21 21:17 GMT-4
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021/03/21 21:17 GMT-4

Yes a PML can be selected. You can also use a low-reflecting boundary.

There may be useful examples in the Application Gallery; try the search.

Yes a PML can be selected. You can also use a low-reflecting boundary. There may be useful examples in the Application Gallery; try the search.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content