Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Constraint the sum of two variables

Posted 2022/02/03 4:53 GMT-5 Structural & Acoustics, General, Heat Transfer & Phase Change Version 5.6 2 Replies

Jian Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working on a problem with two dependent variables, and I have two PDEs to update these variables, respectively. Each variable should be between 0 and 1, and I constrain them via setting upper and lower limits in COMSOL. In addition, I also need to constrain the summation of these two variables smaller than 1, but I did not find a way to do this in COMSOL. Could anyone give me some tips about this?

2 Replies Last Post 2022/02/24 5:43 GMT-5
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022/02/08 2:44 GMT-5

Can't you define a new variable as the sum of the two, and use that subsequently?

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Can't you define a new variable as the sum of the two, and use that subsequently?
Jian Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022/02/24 5:43 GMT-5

Can't you define a new variable as the sum of the two, and use that subsequently?

Thanks for your suggestion, Rene. I will try to implement this.

>Can't you define a new variable as the sum of the two, and use that subsequently? Thanks for your suggestion, Rene. I will try to implement this.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content