Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to calculate deformed area ?

Posted 2022/06/01 23:09 JST Structural & Acoustics, General, Geometry Version 6.0 2 Replies

Shyam Kishor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, In my 2D geometry a tiny circular hole is at the interface of two body, which is defored as simulation going on using step loading boundary conditions.

I want to calculate the new area of deformed hole, how can I do this?

Thanks

2 Replies Last Post 2022/06/22 16:01 JST
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022/06/02 17:15 JST

This blog post may be helpful:

https://www.comsol.com/blogs/computing-controlling-volume-cavity

-------------------
Henrik Sönnerlind
COMSOL
This blog post may be helpful:
Shyam Kishor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022/06/22 16:01 JST
Updated: 3 years ago 2022/06/22 18:28 JST

Thank you very much for your reply, actualy in my model a hole is increases with time due to creep.

I want to plot the area of hole with time. I successfuly plot this using the method provided in the link given by you. Thanks for your valuable suggenstions. Shyam

Thank you very much for your reply, actualy in my model a hole is increases with time due to creep. I want to plot the area of hole with time. I successfuly plot this using the method provided in the link given by you. Thanks for your valuable suggenstions. Shyam

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content