Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to draw a spherical wedge?

Posted 2022/07/25 2:39 GMT-4 Wave Optics, Physics Interfaces Version 6.0 1 Reply

Vaswati Biswas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to draw a spherical wedge. Can anyone suggest me how should I draw this using COMSOL geometry?

I will highly appreciate your help.

Thanks

1 Reply Last Post 2022/07/25 10:52 GMT-4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022/07/25 10:52 GMT-4
Updated: 2 years ago 2022/07/25 10:56 GMT-4
  1. You can create a 2D shape in a Workplane and then revolve it by some appropriate number of degrees, around an axis of your choosing.
  2. You can create an intersection of a sphere and an appropriate shape to yield your wedge. That shape might be a cone or a box or something else, depending on what you want your wedge to look like. If you can provide a drawing (even if done with pencil and paper) of what you are trying to make, it might help others to offer additional suggestions.

If this is what you want: en.wikipedia.org/wiki/Spherical_wedge
.Then I recommend the first approach listed above.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
1. You can create a 2D shape in a Workplane and then revolve it by some appropriate number of degrees, around an axis of your choosing. 2. You can create an intersection of a sphere and an appropriate shape to yield your wedge. That shape might be a cone or a box or something else, depending on what you want your wedge to look like. If you can provide a drawing (even if done with pencil and paper) of what you are trying to make, it might help others to offer additional suggestions. If this is what you want: en.wikipedia.org/wiki/Spherical_wedge .Then I recommend the first approach listed above.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content