Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to extract fluid domain from the given solid domain

Posted 2024/06/05 6:59 GMT-4 3 Replies

Lakshmi sree P
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

If I have a complicated geometry, and i want to do the fluid flow analysis inside that geometry, how will I cretae a fluid domain from the given solid geometry?

3 Replies Last Post 2024/06/06 8:22 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 11 months ago 2024/06/05 8:46 GMT-4

Hello Lakshmi sree,

You can use the "Cap Faces' capability. See this old post, for instance, for more detail.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Lakshmi sree, You can use the "Cap Faces' capability. See [this old post](https://www.comsol.com/forum/thread/241541/create-cfd-mesh-from-cad-geometry?last=2019-08-27T17:39:06Z), for instance, for more detail. Best regards, Jeff
Lakshmi sree P
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 11 months ago 2024/06/06 1:26 GMT-4

hello Jeff Hiller, Thank you for the support. Once I create the fluid geometry from the structural geometry, how do i delete the structural geometry, Because I want to work only with fluid geometry

Thanks and regards Lakshmi sree P

hello Jeff Hiller, Thank you for the support. Once I create the fluid geometry from the structural geometry, how do i delete the structural geometry, Because I want to work only with fluid geometry Thanks and regards Lakshmi sree P
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 11 months ago 2024/06/06 8:22 GMT-4

You should be able to delete it like you would delete any other geometry entity, nothing special.

Jeff

-------------------
Jeff Hiller
You should be able to delete it like you would delete any other geometry entity, nothing special. Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content