Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Phase unwrapping within COMSOL

Posted 2024/08/22 3:29 JST RF & Microwave Engineering, Optimization Version 6.1 3 Replies

Paul Schmalenberg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

Has anyone had success phase unwrapping within COMSOL? We can do so through livelink, but we would like to extract the adjoint sensitivities using a phase front profile as the goal, so unwrapping within COMSOL would be best. With it wrapped, this can play havoc with sensitivities near the phase jump.

3 Replies Last Post 2025/01/03 18:36 JST
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 months ago 2024/08/22 4:03 JST

You might consider to implement the algorithm you are using in Matlab into a Java method that runs inside COMSOL?

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You might consider to implement the algorithm you are using in Matlab into a Java method that runs inside COMSOL?
Kristian Ejlebjærg Jensen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 months ago 2024/08/22 15:44 JST

Hi Paul

Does the application really involve phase changes larger than 2 pi?

Otherwise, you can just move the discontinuity somewhere that does not appear for your application.

Best regards,

Kristian E. Jensen

Technical Product Manager, Optimization

Hi Paul Does the application really involve phase changes larger than 2 pi? Otherwise, you can just move the discontinuity somewhere that does not appear for your application. Best regards, Kristian E. Jensen Technical Product Manager, Optimization
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025/01/03 18:36 JST

This has been implemented in COMSOL v6.3.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
This has been implemented in COMSOL v6.3.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content